Aiwa FR-C150 User Manual Page 30

  • Download
  • Add to my manuals
  • Print
  • Page
    / 34
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 29
– 30 –
< TUNER SECTION >
1. Clock frequency Check
Settings : • Test point : TP2 (CLK)
Method : Set to AM 1710kHz and check that the test point is
2160kHz ± 45Hz.
2. AM VT Check
Settings : • Test point : TP1 (VT)
Method : Set to AM 1710kHz, AM 530kHz and check that the test
point is less than 8.5V(1710kHz) and more than
0.6V(530kHz).
3. AM Tracking Adjustment
Settings : • Test point : TP8 (Rch), TP9 (Lch)
• Adjustment location :
L951(1/3) ...................................... 1000kHz
Method : Set to AM 1000kHz and adjust L951(1/3) so that the test
point is maximum.
4. AM IF Adjustment
Settings : • Test point : TP8 (Rch), TP9 (Lch)
• Adjustment location :
L802 ................................................ 450kHz
5. FM VT Adjustment
Settings : • Test point : TP1 (VT)
• Adjustment location : L907
Method : Set to FM 108.0MHz and adjust L907 so that the test
point becomes 7.0V ± 0.05V. Then set to FM 87.5MHz
and check that the test point is more than 0.5V.
6. FM Tracking Adjustment
Settings : • Test point : TP8 (Rch), TP9 (Lch)
• Adjustment location : L904
Method : Set to FM 98.0MHz and adjust L904 so that test point is
maximum. and distortion is minimum.
7. FM Tracking Check
Settings : • Test point : TP8 (Rch), TP9 (Lch)
Method : Set to FM 98.0MHz and check that the test point is
less than 9.0dBµV.
8. DC Balance / Mono Distortion Adjustment
Settings : • Test point : TP3, TP4 (DC Balance)
: TP8 (Rch), TP9 (Lch) (Distortion)
• Adjustment location : L801
• Input level : 60dBµV
Method : Set to FM 98.0MHz and adjust L801 so that the
distortion is less than 1.3%. Then check the voltage
between TP3 and TP4 is 0V ± 0.5V.
ADJUSTMENT <TUNER / FRONT>
< FRONT SECTION >
1. µ-CON OSC Adjustment
Settings : • Test point : TP1 (O-K-SCAN) and GND
• Adjustment location : L101
Method : Insert AC plug while pressing TUNER function key.
Adjust L101 so that the frequency at the test point is
78.4Hz ± 0.08Hz (12.742ms ~ 12.768ms).
Page view 29
1 2 ... 25 26 27 28 29 30 31 32 33 34

Comments to this Manuals

No comments