Aiwa NSX-DS8 User Manual download pdf (Page 32)

100

101

ENGLISH

LISTENING TO EXTERNAL SOURCES

PLAYING AN EXTERNAL ANALOG

SOURCE

To play equipment connected to either the VIDEO1/DVD/AUX

or the VIDEO2/LD/MD jacks, proceed as follows.

Select input.

To play the equipment connected to the VIDEO1/DVD/AUX

jacks, hold down VIDEO1/DVD/AUX.

To play the equipment connected to the VIDEO2/LD/MD

jacks, hold down VIDEO2/LD/MD.

“ANALOG” and “DIGITAL” appear alternately on the display.

Release the button when “ANALOG” is shown.

Analog input from your equipment is selected as the source.

Play the connected equipment.

To change the source name display

When the analog source is selected with VIDEO1/DVD/AUX,

“VIDEO1” is displayed initially as the source name. It can be

changed to “DVD” or “AUX”.

Similarly, “VIDEO2” is initially displayed for the analog source

selected with VIDEO2/LD/MD, but can be changed to “LD” or

“MD”.

With the power on, hold down the desired function button

(VIDEO1/DVD/AUX or VIDEO2/LD/MD) and press POWER

repeatedly to select a name.

To adjust the sound level of the external source

This unit is equipped with the overload indicator. When analog

signal input from the connected equipment is too high,

“OVERLOAD” lights up continuously on the display.

When this occurs, or when the sound level of the external source

is much lower than that of other function sources, adjust it as

follows.

1 Hold down either VIDEO1/DVD/AUX or VIDEO2/LD/MD to

select analog input and play the equipment.

2 Press f or g so that the sound level becomes the same

as that of other function sources.

NOTE

• During recording, the sound level cannot be adjusted.

• Only the sound level for analog external sources can be

adjusted. If f or g is pressed when a digital external

source is selected, the sound level for the corresponding analog

external source is changed.

PLAYING AN EXTERNAL DIGITAL SOURCE

To play equipment connected to either the DIGITAL IN OPTICAL

or the DIGITAL IN COAXIAL jack, proceed as follows.

Select input.

To play the equipment connected to the DIGITAL IN

OPTICAL jack, hold down VIDEO1/DVD/AUX.

To play the equipment connected to the DIGITAL IN

COAXIAL jack, hold down VIDEO2/LD/MD.

“ANALOG” and “DIGITAL” appear alternately on the display.

Release the button when “DIGITAL” is shown.

The DIGITAL indicator lights up on the display, and digital

input from your equipment is selected as the source.

Play the connected equipment.

To play Dolby Digital software

This unit is equipped with a Dolby Digital decoder. You can enjoy

theater-quality audio right in your home if you play a Dolby Digtal

software on a compatible video equipment connected digitally

to this unit.

To play Dolby Digital software, see section “Dolby Surround”

(pages 21 to 24).

NOTE

• This unit supports Dolby Digital bitstream signals, and linear

PCM signals with a sampling frequency of 32 kHz, 44.1 kHz or

48 kHz. This unit cannot play software whose sampling

frequency is 96 kHz.

• Some DVD players connected digitally to this unit may cause

noise during some DVD operation such as when searching a

disc, skipping a chapter, etc.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 100 101

Comments to this Manuals

No comments

Aiwa NSX-DS8 User Manual Page 32

Comments to this Manuals

Related products and manuals for Acoustics Aiwa NSX-DS8