Aiwa NSX-A10 User Manual download pdf (Page 10)

Al EDIT RECORDING

The Al edit function enables CD recording without worrying about

tape length and track length. When a CD is inserted, the unit

automatically calculates track lengths. If necessary, the order of

tracks is rearranged so that no track is cut short.

(Al: Artificial Intelligence)

4,8

Insert the tape tb be recorded on into deck 1, and

wind up to the beginning of the front side.

Press the W= button to open the cassette holder and insert

the tape with the exposed side down. Press the TAPE button,

and wind up the tape with the < button.

Press the CD button.

Load discs onto the trays.

While pressing the SHIFT button, press the

EDIT/

CHECK button on the remote control.

“Al EDIT” is surrounded by red in the display.

Select a disc by pressing one of the DISC DIRECT

PLAY buttons.

only one disc is inserted, skip this step.’

Press the numeric buttons on the remote control

to designate the tape length.

10 to 99 minutes can be specified.

Example: When using a 46-minute tape, press the 4 and 6

buttons.

In a few seconds, the microcomputer decides the tracks to be

recorded on each side of the tape.

Remaining time

Programmed

Tape length

of recoraing 1 track numbers

Tape side

Number of

A: First recording side programmed

B: Second recording side tracks

Press the @ button on deck 1 first to start

recording on the first side.

CD play and recording of edited tracks for the first side start

simultaneously. When the end of the tape is reached, deck 1

enters the recording stop mode. After entering the recording

stop mode, go to step 8.

9 ENGLISH

Press the EDIT/CHECK button- on the remote

control while pressing the SHIFT button to

prepare for the second recording.

Turn over the tape in deck 1 and press the @

button to start recording on the second side.

To stop recording in the middle

Press the WA button on deck 1.

Deck operation and CD play stop simultaneously.

To clear the editing contents

Press the

■ CLEAR button twice in’’the stop mode so that the

red line surrounding “Al EDIT in the display goes out, or press

the 4 OPEN/CLOSE button.

To check the editing contents

Before recording, press the EDIT/CHECK button on the remote

control while pressing the SHIFT button.

Each time it is pressed, the contents of each side of the tape are

displayed in turn.

To check the order of the programmed track numbers

Before recording, press the M UP or M DOWN button for

CD repeatedly.

Each time it is pressed, the track number and programmed

number are displayed in order.

Order of the tracks

Programmed track

to be ~laved

numbers

Number of programmed tracks

To add tracks to the edited contents

If the remaining time is enough to record some tracks in step 6,

you can add tracks from other discs in the compartment before

recording starts.

1 Press the EDIT/CHECK button while pressing the SHIFT

button to select side A or B.

2 Press one of the DISC DIRECT PLAY buttons to select a

disc.

3 Press the numeric buttons to select tracks.

If the playing time of a selected track is longer than the tape

remaining time, it is not added.

4 Repeat steps 2 and 3 for adding more tracks.

Time on cassette tapes and editing time

The actual cassette recording time is usually a little longer than

the specified recording time printed on the label. This unit can

program tracks to use the extra time. When the total recording

time is a little longer than the tape’s specified recording time

after editing, the display shows the extra time (without a minus

mark),

instead of the time remaining on the tape (with the minus

mark).

* The edit function cannot be used with discs containing 31 tracks

or more.

● Recording is inhibited if the erasure prevention tab on either

side of the tape is broken off.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 43 44

Comments to this Manuals

No comments

Aiwa NSX-A10 User Manual Page 10

Comments to this Manuals

Related products and manuals for Cassette players Aiwa NSX-A10