Aiwa CX-NA50 Operations Instructions download pdf (Page 18)

MICROPHONEMIXING VOCAL FADER/MULTIPLEX FUNCTIONS

KARAOKE-

A microphone (not supplied) can be connected to this unit,

allowing you to sing along to music sources.

Use a microphone with mini plugs (e3.5 mm, V8 inch).

1 Connect your microphone to the MIC jack,

MIC

2 Press one of the function buttons to select the

source to be mixed, and play the source.

3 Adjust the volume and tone of the source.

4 Turn the MIC VOL control to adjust the

microphone volume.

To record microphone sound mixed with source sound

Follow the procedure for recording from the sound source (see

page 13),

The SYNCHRO DUBBING button cannot be used for mixing

recording.

When not using the microphone

Set the microphone volume to MIN and remove the microphone

from the MIC jack.

'lL[_,]ul=

• If a microphone is held too near the speakers, a howling sound

may be produced. In this case, hold the microphone away

from the speakers, or decrease the microphone volume.

• If sound through the microphone is extremely loud, it may be

distorted. In this case, decrease the microphone volume.

Recommended microphones

The use of unidirectional type microphone is recommended to

prevent howling. Contact your local Aiwa dealer for details,

This unit can use discs or tapes as Karaoke sources.

Press the KARAOKE button repeatedly to select the vocal

fader or multiplex function.

Use the vocal fader function for ordinary discs or tapes.

Use the multiplex functionfor multi audio discs or tapes.

Each time the KARAOKE button is pressed, one of these

functionsis selected cyclically,

@ ® ®

_/ !_ii¸ _'7 _'- !_

(_ Vocal Fader

The singer's voice becomes softer than the accompaniment.

_) Auto Vocal Fader

The singer's voice becomes softer only while there is audio

input through a microphone.

(_ Multiplex

Only the sound on the left channel is heard from both

speakers, and the sound on the rightchannel is muted.

(_ Auto Multiplex

The sound on the left channel is heard from both speakers,

and the sound on the right channel is muted only while there

is audio input through a microphone.

_Cancel

To change the time lag setting in Auto Vocal Fader or

Auto Multiplex function

The muted original singer's voice can be turned faster to the

normal level.

When Auto Vocal Fader or Auto Multiplex is selected, "A-VF" or

"AUTO MPX" is displayed for 3 seconds and changes to the

selected function name. After the selected function name is

displayed, hold down the KARAOKE button until FAST is

displayed.

To return to the initial setting, select SLOW.

When the power is turned off, SLOW is restored.

To change the audible channel in Multiplex function

Only the sound on the right channel can be heard from both

speakers.

When Multiplex isselected, "MPX Loch"isdisplayed for 3 seconds

and changes to the selected function name. After the selected

functionname isdisplayed, holddown the KARAOKE buttonuntil

MPX-R is displayed.

To return to the initial setting, select MPX-L.

When the power is turned off, MPX-L is restored.

• The Karaoke functions may not operate correctly with the

following kinds of CDs or tapes.

- Those with monaural sound

- Those recorded with strong echoes

* Those with the vocal part recorded on the right or left side of

the sound width

• While the Karaoke function is on, the sound is output as

monaural.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 24

Comments to this Manuals

No comments

Aiwa CX-NA50 Operations Instructions Page 18

Comments to this Manuals

Related products and manuals for Cassette players Aiwa CX-NA50