Aiwa CSD-MD5 User Manual download pdf (Page 8)

MD PLAYING

BASIC OPERATIONS

■ STOP

AMD

EJECT

DISP

0-15,+10

1 Insert a disc into the disc drive with the iabei

side up and in the direction of the arrow.

Arrow

2 Press MD ^11 to start piay.

Track number or track title*

Ti-acji______

nnnr

■5,'t

Track number Elapsed playing time

* applicable when the track title is registered.

To stop play, press ■ STOP, MD ■ on the remote control

is also available.

To pause play, press MD ►II. To resume play, press

again.

To search for a particular point during play, keep

►W pressed and release it at the desired point.

To skip to the beginning of a track, press or

repeatedly or turn JOG DIAL until the desired track is

displayed.

To remove the disc, press ± MD EJECT.

To start play when the power is off

Press MD ►!!. The power is turned on and play of the

loaded disc begins.

To check the remaining time

During play, press DISP repeatedly.

Each time it is pressed, the display changes cyclically.

® Elapsed playing time of the track

(D Remaining time of the track

(D Remaining time of the disc

® TRACK is lit up on the display.

@ TRACK and REMAIN are lit up on the display.

(3) TOTAL and REMAIN are lit up on the display.

You cannot check the remaining time of the disc when

RANDOM or Ci. 1 is lit up.

To select a track with the remote control

Press the numbered buttons 0-15 and +10.

Example:

To select the 25th track, press +10 twice and 5.

To select the 20th track, press +10 twice and 0.

MD play starts from the selected track and continues to the

last track.

To play a disc at double speed

Press X 2 on the remote control during play.

To resume normal play, press again.

When using the main unit, keep MD ►!! pressed during

regular play until disc plays at double speed.

To resume, repeat the above.

Display information in stop mode

Total number of tracks or disc title*

^¿KSr PCV* MZ

/ /

/ ir.ljl 1

IJ- lU

Total number of tracks Total playing time

* applicable when the disc title is registered

TOC READING is displayed while:

The unit reads the data on the inserted disc. After

completion, the information contained in the disc is

displayed.

NOTE

Do not open or close the operating panel while ejecting the

disc, otherwise a disc may be scratched.

Do not hold the disc while ejecting it, otherwise a disc

cannot be inserted the next time.

If this happens, turn off the power and disconnect the AC

cord. Then connect it again.

Nothing other than an MD should be inserted into the disc

drive. Otherwise the disc may become scratched, causing

a malfunction or safety hazard such as an electric shock.

Do not attempt to insert another MD while a disc is already

inside the drive.

Do not tilt the unit with disc loaded. Doing so may cause

malfunction.

8 ENGLISH

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 79 80

Comments to this Manuals

No comments

Aiwa CSD-MD5 User Manual Page 8

Comments to this Manuals

Related products and manuals for Acoustics Aiwa CSD-MD5