Aiwa CSD-MD5 User Manual download pdf (Page 4)

PREPARATIONS

CONNECTIONS

REMOTE CONTROL

IMPORTANT

Be sure to connect the AM antenna first, then connect the

AC cord in the end.

1 Connect the supplied AM antenna to AM LOOP

ANT terminal.

Inserting batteries

Detach the battery cover on the rear of the remote control

and insert two R6 (size AA) batteries.

2 Connect the AC cord to an AC outlet.

When to replace the batteries

The maximum operational distance between the remote

control and the sensor on the main unit should be

approximately 5 meters (16 feet). When this distance

decreases, replace the batteries with new ones.

NOTE

If the unit is not going to be used for an extended period of

time, remove the batteries to prevent possible electrolyte

leakage.

The remote control may not operate correctly when:

- The line of sight between the remote control and the unit

is exposed to intense light, such as direct sunlight

- Other remote controls are used nearby (television, etc.)

The display window demonstrates the functions of the

unit. (To set the current time, see SETTING THE

CLOCK on page 22.)

CAUTION

Use only the supplied AC cord. Use with other cords may

result in the risk of fire.

To stand the AM antenna on a surface

Fix the claw to the slot.

• Do not disconnect the AC cord while the power is being

on. Otherwise, the data concerning the contents of the MD

recording may not be registered properly.

• Do not bring the AM antenna near the AC cord since noise

will be picked up.

• Do not unwind the AM antenna wire.

ENGLISH

1 2 3 4 5 6 7 8 9 ... 79 80

No comments

Aiwa CSD-MD5 User Manual Page 4