Aiwa XR-DV700 Service Manual download pdf (Page 52)

-52-

DVD TEST MODE-2/3

2. Front End Test Mode

2-1. How to Start up the Front End Test Mode

· Starting up this mode from the Status/Media display mode

Press the “ENTER” button and the “PLAY” button at the same time for 3 seconds or more in the Status/Media display mode.

· Starting up from the normal mode

From the remote control, input the following commands in the order starting from “RETURN” ™ “ANGLE” ™ “RETURN” ™ “C”

within 2 seconds while the disc is stopped.

After the FRONT END test mode has started up, the FL display is changed to “FE TEST”.

2-2. How to Quit the Front End Test Mode

Disconnect the AC plug from the power outlet to exit the test mode.

Alternately, quit the test mode by the following operation.

· Press any of the FUNCTION buttons. (Buttons other than the DVD/CD button)

· Press the POWER button.

2-3. Function Descriptions

Operations of both of the main unit operation buttons and the remote control unit operation buttons are described below.

Status

Operation buttons Operation buttons of the

Operations

of the main unit remote control unit

FF “1” Sled advance in FWD

RWD “2” Sled advance in RWD

STOP ECO “3” Spindle continuous kick (forward rotation)

ENTER “4” Laser ON/OFF

PLAY “7” PLAY (ALL SERVO ON)

PLAY STOP “6” STOP (ALL SERVO OFF)

Each operation is described below.

2-3-1. Sled advance in FWD

The optical pickup moves toward the outer circumference when the “FF” buttons of the main unit or the “1” button of the remote control

unit is pressed in the STOP status.

Because the optical pickup will not stop movement even when it reaches the outermost circumference, press the “STOP” of the main unit or

the “6” button of the remote control unit b.

2-3-2. Sled advance in RWD

The optical pickup moves toward the inner circumference when the “RWD” button of the main unit or the “2” button of the remote control

unit is pressed in the STOP status.

2-3-3. Spindle continuous kick (forward rotation)

The spindle rotates in the forward direction when the “ECO” button of the main unit or the “3” button of the remote control unit is pressed

in the STOP status.

To stop the rotation, press “STOP” of the main unit or “6” of the remote control unit.

2-3-4. Laser ON/OFF

Laser of the pickup is turned on or off when the “ENTER” button of the main unit or the “4” button of the remote control unit is pressed in

the STOP status.

The display changes as shown below by every pressing of the “ENTER” button of the main unit.

DVD laser ON ™ CD laser ON ™ Laser OFF ™ DVD laser ON ™ CD laser ON ™ Laser OFF ···

2-3-5. PLAY (ALL SERVO ON)

When the “PLAY” button of the main unit or the “7” button of the remote control unit is pressed in the STOP status, the disc detection and

the disc identification are performed. Then the machine enters the Test Play mode.

Neither picture nor audio is output during Test Play mode.

To quit the Test Play mode, press “STOP” of the main unit or “6” of the remote control unit.

2-3-6. STOP (ALL SERVO OFF)

The machine returns to the STOP status when “STOP” of the main unit or “6” of the remote control unit is pressed.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 89 90

Comments to this Manuals

No comments

Aiwa XR-DV700 Service Manual Page 52

Comments to this Manuals

Related products and manuals for DVD players Aiwa XR-DV700