Aiwa XR-M70 User Manual download pdf (Page 7)

USING THE REMOTE CONTROL

Inserting batteries

Detach the battery cover on the rear of the remote control and

insert two R03 (size AAA) batteries.

SETTiNG THE CLOCK

When to replace the batteries

The maximum operational distance between the remote control

and the sensor on the CD player unit should be approximately 5

meters (16 feet). When this distance decreases, replace the

batteries with new ones.

Opening and ciosing the top cover

When to use the remote control

Some operations can be performed using the buttons on the

remote control only, while others can be performed using the

buttons on the two main units as well as on the remote control.

This instructions manual clearly describes the buttons available

for each operation.

NOTE

■ If the unit is not going to be used for an extended period of

time, remove the batteries to prevent possible electrolyte

leakage.

’ The remote control may not operate correctly when:

- The line of sight between the remote control and the remote

sensor (see the illustration on the previous page) is exposed

to intense light, such as direct sunlight.

- Other remote controls are used nearby (television, etc.)

SHIFT

To use the SHIFT button

Buttons ® have two different functions. One of the functions is

indicated on the button, and the other on the plate above the

button.

To use the function on the button, simply press the button.

To use the function on the plate above the button, press the

button while pressing the SHIFT button.

1 Press the POWER button to turn on the power.

2 Press the CLOCK button while pressing the

SHIFT button on the remote control.

3 Within 4 seconds, press the II button.

The hour flashes.

n h/t I i /W///

/■■' II I C-U u

To switch to the 24-hour standard, press the ■ button.

To restore the 12-hour standard, press the ■ button again.

4 Press the

hour.

button to designate the

5 Press the II button to set the hour.

The hour stops flashing and the minute starts flashing.

6 Press the ◄◄ or button to designate the

minute.

7 Press the II button to set the minute and

complete the setting.

The minufe stops flashing on the display and the clock starts

from 00 seconds.

To display the current time

Press the CLOCK button while pressing the SHIFT button on

the remote control. The time is displayed for 4 seconds.

If the clock display flashes while the power is off

This is caused by a power interruption. The current time needs

to be reset.

If power is interrupted for more than approximately 12 hours, all

settings stored in memory after purchase need to be reset.

ENGLISH 7

1 2 3 4 5 6 7 8 9 10 11 12 ... 55 56

Comments to this Manuals

No comments

Aiwa XR-M70 User Manual Page 7

Comments to this Manuals

Related products and manuals for Acoustics Aiwa XR-M70